Lebanta la Conveyor la Plastiki la 1230 Flush Grid
Paramethara
| Mofuta oa Modular | Gridi ea ho Hlatsoa ea 1230 | |
| Bophara bo Tloaelehileng(mm) | 50 100 150 200 250 300 350 400 450 500 50N
| Hlokomela:n e tla eketseha ha palo e feletseng e ntse e eketseha: ka lebaka la ho fokotseha ha thepa e fapaneng, 'nete e tla ba tlase ho feta bophara bo tloaelehileng. |
| Bophara bo sa tloaelehang | 50*N+16.66*n | |
| Pitch(mm) | 12.7 | |
| Lebanta la Thepa | PP/POM | |
| Lisebelisoa tsa Pin | PP/PA/PA6 | |
| Bophara ba Pin | 5mm | |
| Mojaro oa Mosebetsi | POM:11000 PP:7000 | |
| Thempereichara | PP:+1C° ho isa ho 90C° POM:-30C° ho isa ho 90C° | |
| Sebaka se Bulehileng | 18% | |
| Boima ba lebanta (kg/㎡) | 7.9 | |
Li-sprocket tsa ente tsa 1230
|
ILi-sprockets tsa ente |
Meno | Bophara ba sekontiri | Bophara ba Kantle | Boholo ba Boro |
E fumaneha ho Kopa Ka E entsoe ka mechini | ||
| mm | intshi | mm | inch | mm | |||
| 1/3-1271-10T | 10 | 41.2 | 1.62 | 41.8 | 1.64 | 20 25 | |
| 1/3-1271-15T | 15 | 62.4 | 2.45 | 62.9 | 2.47 | 20 25 | |
| 1/3-1271-19T | 19 | 78.8 | 3.10 | 79.3 | 3.12 | 20 25 | |
Kopo
1.Lijo
2. Seno se nooang
3. Meriana
4. Tšebeletso ea poso
5. Liindasteri tse ling
Molemo
1.Khanyetso e matla ea ts'enyeho,
2. Matla a ho tsikinyeha a phahameng,
3.Botsitso bo botle,
4. Ho hanyetsa mocheso le ho fetoha ha oona,
5. Lerata le tlase,
6.Khanyetso e phahameng ea mocheso,
7. Bophelo ba tšebeletso e telele
Thepa ea 'mele le ea lik'hemik'hale
Polyoxymethylene(POM), e tsejoang hape e le acetal, polyacetal, le polyformaldehyde, Ke thermoplastic ea boenjiniere e sebelisoang likarolong tse nepahetseng tse hlokang ho tiea ho hoholo, khohlano e tlase le botsitso bo botle ba litekanyo. Joalo ka li-polymer tse ling tse ngata tsa maiketsetso, e hlahisoa ke lik'hamphani tse fapaneng tsa lik'hemik'hale tse nang le mekhoa e fapaneng hanyane 'me e rekisoa ka mabitso a fapaneng a kang Delrin, Kocetal, Ultraform, Celcon, Ramtal, Duracon, Kepital, Polypenco, Tenac le Hostaform.
POM e khetholloa ka matla a eona a phahameng, ho thatafala le ho tiea ho fihlela ho -40 °C. POM ka tlhaho e tšoeu e sa bonahaleng ka lebaka la sebopeho sa eona se phahameng sa kristale empa e ka hlahisoa ka mebala e fapaneng. POM e na le boima ba 1.410–1.420 g/cm3.
Polypropylene(PP), e tsejoang hape e le polypropene, Ke polymer ea thermoplastic e sebelisoang lits'ebetsong tse fapaneng. E hlahisoa ka polymerization ea kholo ea ketane ho tsoa ho monomer propylene.
Polypropylene ke ea sehlopha sa li-polyolefin 'me e batla e le kristale ebile ha e na polar. Litšobotsi tsa eona li tšoana le polyethylene, empa e thata hanyane ebile e hanela mocheso haholoanyane. Ke thepa e tšoeu, e tiileng ka mechine 'me e na le khanyetso e phahameng ea lik'hemik'hale.
Nylon 6(PA6)kapa polycaprolactam ke polymer, haholo-holo polyamide e nang le semicrystalline. Ho fapana le boholo ba li-nylon tse ling, nylon 6 ha se polymer ea condensation, empa ho e-na le hoo e etsoa ke polymerization e bulang selikalikoe; sena se etsa hore e be nyeoe e ikhethang papisong pakeng tsa condensation le li-polymer tse ekelitsoeng.
