Lebanta la ho tsamaisa thepa la polasetiki le bataletseng la 7300
Paramethara
| Mofuta oa Modular | Gridi ea ho Hlatsoa ea 7300 | |
| Bophara bo Tloaelehileng(mm) | 76.2 152.4 228.6 304.8 381 457.2 533.4 609.6 685.8 76.2*N
| (N,n e tla eketseha ha palo yohle e atiswa; ka lebaka la ho fokotseha ha thepa e fapaneng, 'Nete e tla ba tlase ho feta bophara bo tloaelehileng) |
| Bophara bo sa tloaelehang | W=76.2*N+12.7*n |
|
| Pitch(mm) | 25.4 | |
| Lebanta la Thepa | POM/PP | |
| Lisebelisoa tsa Pin | POM/PP/PA6 | |
| Bophara ba Pin | 5mm | |
| Mojaro oa Mosebetsi | POM:22000 PP:14000 | |
| Thempereichara | POM:-5C°~ 80C° PP:+5C°~104C° | |
| Sebaka se Bulehileng | 34% | |
| Radius e kgutlisang morao(mm) | 30 | |
| Boima ba lebanta (kg/㎡) | 6.9 | |
Li-sprocket tse 7300 tse entsoeng ka mechini
| Li-sprocket tse entsoeng ka mechini | Meno | Bophara ba sekontiri (mm) | Obophara ba utside | Boholo ba Boro | Mofuta o Mong | ||
| mm | Senthimithara | mm | Inch | mm | E fumaneha Ha e kopuoa Ka Machined | ||
| 1-2540-12T | 12 | 98.1 | 3.86 | 96.8 | 3.81 | 25 30 35 40 50 | |
| 1-2540-18T | 18 | 146.3 | 5.75 | 146.1 | 5.75 | 40 50 60 | |
Kopo
1. Lijo tse Lokisitsoeng
2. Litholoana le meroho
3. Mochini oa ho paka
4.mochini oa ho ngola mabitso
5. Lebenkele la ho baka
6. Lebese
7. Nama
8. likhoho
9.leoatleood
Molemo
1. E hanela oli
2. E hanela asiti le alkali
3. E hanela meokho
4. E hanela mocheso
5. E hanela serame
6. E hanela ho tsofala
7. Ho iketsetsa lintho hoa fumaneha
h.Mmala o ikhethelang
8.E bonolo ho kopanya le ho hlokomela
9. Tshebetso e phahameng
10. Theko ea thekiso e tobileng ea fektheri
11. Boleng bo tšepahalang le tšebeletso ea kamora ho rekisoa
Thepa ea 'mele le ea lik'hemik'hale
Polyoxymethylene (POM), e tsejoang hape e le acetal, polyacetal, le polyformaldehyde, Ke boenjinierethermoplastic e sebelisoa likarolong tse nepahetseng tse hlokang ho tiea ho hoholo, tse tlasekhohlano le botsitso bo babatsehang ba litekanyo. Joalo ka tse ling tse ngata tsa maiketsetso lipolamine, e hlahisoa ke lik'hamphani tse fapaneng tsa lik'hemik'hale tse nang le mekhoa e fapaneng hanyane 'me e rekisoa ka mabitso a fapaneng a kang Delrin, Kocetal, Ultraform, Celcon, Ramtal, Duracon, Kepital, Polypenco, Tenac le Hostaform.
POM e khetholloa ka matla a eona a phahameng, ho thatafala le ho tiea ho fihlela ho -40 °C. POM ka tlhaho e tšoeu e sa bonahaleng ka lebaka la sebopeho sa eona se phahameng sa kristale empa e ka hlahisoa ka mebala e fapaneng. POM e na le boima ba 1.410–1.420 g/cm3.
Polypropylene (PP), e tsejoang hape e le polypropene, Kethermoplastic polymere sebelisoa lits'ebetsong tse fapaneng. E hlahisoa kapolymerization ea kholo ea ketaneho tloha homonomer propylene.
Polypropylene ke ea sehlopha sali-polyolefin'me kee kristale hanyanelee seng polar. Thepa ea eona e tšoana lepolitheine, empa e thata hanyane ebile e hanela mocheso haholoanyane. Ke thepa e tšoeu, e tiileng ka mechine 'me e na le khanyetso e phahameng ea lik'hemik'hale.
Nylon 6(PA6) or polycaprolactam is a polymer, ka ho khethehasemicrystalline polyamideHo fapana le tse ling tse ngatali-nylon, nylon 6 ha sepolymer ea ho kolobisa, empa ho e-na le hoo e thehiloe kepolymerization ea ho bula lesale; sena se etsa hore e be nyeoe e ikhethang papisong pakeng tsa ho kolobisa leli-polymer tse eketsehileng.
